Model :
Wood Filler
Description :
Wood Filler is a water-based cellulose fiber ready-mixed, high performance filler that gives a tough and sandable surface after drying. It can be easily cleaned up with water before cure. Can be stained, varnished, painted and acts like real wood. Suitable for furniture, paneling, doors, plywood patching, etc.
FEATURES:
♦ Low odor.
♦ Hard and smooth surface.
♦ One parts no mixing.
♦ Environmental friendly, easily clean up
with water before cured.
♦ Good adhesion to wood, concrete, metal
and marble.
USES:
♦ DIY application: furniture, panelling, doors,
plywood patching.
WE RECOMMEND PRELIMINARY COMPATIBILTY TESTS
PRIOR TO APPLICATION TO ACHIEVE DESIRABLE
RESULTS
NOT RECOMMENDED FOR:
Not for: use in areas of constant water
immersion.
Not for: joint movement.
COLOUR:
Natural, teak.
APPLICATION:
♦ Surface to be filled must be clean and dry.
♦ Mask smooth surface to simplify clean up.
♦ Apply wood filler firmly into place with a
putty knife.
♦ Fill up slightly higher surface to allow for
sanding.
♦ Sand after 30minutes on shallow repairs,
deep repairs after 2-8hours.
♦ Use medium sand paper, do not
continuous high speed sanding.
CURING TIME:
WOOD FILLER WILL DRIED IN APPROXIMATELY 30
MINUTES AND WILL CURE TO A DEPTH OF 5mm IN 1-
2 DAYS. LONGER CURING TIME MAY BE NECESSARY
IN COLD AND HIGH HUMIDITY AREA.
SPECIFICATION:
Base Vinyl acetate latex
Appearance Non-sagging paste
Colour Natural, teak.
Specific gravity 1.73 ± 0.2
Solid contents 75±2 %
Tack free time 10 minutes approx.
Application
temp.
5°c to 50°c
Service temp. -10°c to 80°c
Shelf life 12 months
STORAGE:
Material should be stored in a dry and cool place
between +50c to +300c.
