X'traseal Plus Series MS-609SE Grip & Go Polymer Sealant - White (2 x 17ml)
MS-GO9SE GRIP & GO is a Hybrid Silyl Modified Polyether technology based high grip one component strong adhesive. It is suitable for direct bonding on a wide range of heavy construction materials without support and able to hold up to 12 kg weight. MS-609SE Grip & Go has high performance mechanical strength and combines high stiffness with excellent bonding. It is recommended for industrial grade sealing and bonding.
FEATURES
♦ High performance mechanical properties
♦ Extremely fast grip
♦ Does not contain solvent, isocyanate, acid and silicone oil
♦ Non-bleeding and crack resistant
♦ No visible stain even on porous substrate
♦ Can be applied on moist surface
♦ No bubble formation
♦ Paintable & environment friendly
♦ External & internal use
♦ Fungus is not easily grow on adhesive
USES:
MS-609SE GRIP & GO is specially developed as a universal adhesive for gluing of lightweight materials such as mirror, assembly of threshold, skirting board, stripes, decorative wall, panel, and porcelain materials. MS-609SE GRIP & GO is also applicable for coated metal, stainless steel, copper, zinc, polyester panel, HPL panels, polystyrene, polycarbonate, UPVC, epoxy, finished wood and etc.
Due to a large variety of different coatings and substrates, we recommend preliminary compatibility tests prior to application to achieve desirable results
Directions:
1. Advisable to put on gloves before the application.
2. Surface must be clean and dry. Remove all dirt, oil, grease detergents and loose material.
3. Simply remove cap, puncture inner seal and apply by pushing adhesive ahead of the nozzle whilst holding tube at 45° angle.
4. Bring the materials into position and press well to make sure that the thickness of the adhesive is minimum 2-3 mm between material and surface.
