Product Description
SA-107 is a one part all purpose acetic curing silicone sealant that offers excellent adhesion, weatherability, elasticity and primer less adhesion to most materials. For multipurpose usage of general glazing and sealing applications
Features:
♦ Acetic acid curing system
♦ Outstanding durability
♦ One part no mixing
♦ Permanently flexible
♦ Excellent gunnability (-20°c to 50°c)
♦ Weather proof
♦ Low shrinkage
♦ No sagging
♦ Primerless adhesion to most materials
♦ Uv resistance
Uses:
♦ General glazing: glass, plastic, channel or
stop.
♦ Curtainwall sealing: glass, steel, granite and
plastic.
♦ General sealing: sheet metal, skylights,
ventilators, air-conditioning.
Not recommended for:
SA-107 is an acetic acid curing silicone and is not
IMPORTANT NOTICE :
Dear Customer, due to courier cannot accept combined parcel :
1) Maximum ONE (1) UNIT per Order, and CANNOT Combine purchase with other product in ONE Order.
2) MUST separate order if you purchase more than ONE (1) UNIT
3) We will have to cancel the order, if more than One (1) UNIT in ONE Order.
suitable where the acetic acid component will
corrode the base material.
Not for: traffic areas or areas subject to abrasion.
Not for: structural glazing.
Not for: on marble, quartzite or natural stones.
Joint design:
The specified sealant bead size should be
calculated to comply with the compression and
extension capabilities of the sealant in relation to
the anticipated joint width due to expansion and
contraction.
Generally calculation of the width of SA107sealant bead should be computed on the
basis of a maximum ± 20 %
Compression and extension capability minimum
bead size should not be less than 3mm to
accommodate movement. Design joint depth of
which ratio width becomes 0.5 to 1.
Suitable joint depth vs width:
6mm x 6mm
8mm x 12mm
10mm x 20mm
Joint size minimum 3mm x 3mm.
Joint size maximun 30mm.
Application:
♦ Surface must be clean and dry.
♦ Mask smooth surface to simplify clean up.
♦ Use approved back-up material in joint.
♦ Cut nozzle to desired size.
♦ Insert cartridge into caulking gun.
♦ Push sealant ahead for uniform bead.
♦ Tool within 5 minutes.
♦ Clean off excess sealant with M.E.K. or
toluene.
Curing time:
SA-107 will tack free in approximately 15 minutes
and will cure to a depth of 10mm in 7 days.
Longer curing time may be necessary in dry and
low humidity area.
